The Breg Polar Care device is an effective cold therapy solution that is used in cases of pain or inflammation—as seen after operations or accidents. Esteemed for its durability and efficiency, this unit enables users to get better in less time.
The Polar Care Cube needs regular maintenance and proper care for it to operate at its optimum best all the time. There are some guidelines on how to use the unit properly and keep it effective for a long time.
1. Regular Cleaning to Prevent Build-Up
It is important to clean your Breg Polar Care Cube after each use to ensure that it continues to work properly. The presence of water in the system results in formation of lime scale or perhaps bacterial growth, which in turn slows down the efficiency of the system. To clean, remove water from the container or jar and pour in warm water with a few drops of mild soap. Allow the solution to stand for a few minutes then rinse with clean water until there is no trace of soap left.
2. Check and Maintain Tubing and Connections
Indeed, the tubing and connections in the Polar Care Cube are essential parameters to ensure the continuous flow of cold water without any hitches. It is also important to inspect the tubing as it may develop cracks or bends that may hinder the flow of the water. It is also important to ensure that the connectors are correctly screwed in to avoid any form of leakage. If you realize that there is a problem with the tubing in any way, then it must be changed so that there is no interference with the therapy sessions.
3. Use Clean, Distilled Water for Optimal Performance
You should always use distilled water in your Polar Care Cube as hard water contains minerals that can block the system. Distilled water has no contaminants that may build up with time and affect the performance of the unit. If distilled water is not available, filtered water is suitable, but cleaning might be needed more often to have the Cube in its best form.
4. Conduct Periodic Performance Checks
For everyday use, it is also advisable to conduct some performance tests on your Polar Care Cube, even if you are maintaining it regularly. Power on, then verify the rate of water flow and ensure that the water passing through the pad is cold enough to help in the therapy. If the temperature or flow is not normal, check the user manual or seek professional help if necessary.
5. Replace Worn Parts as Needed
Some of the tubing, connectors, or the power adapter may deteriorate with use or get damaged over time. Changing worn out or damaged parts are necessary to ensure the Breg Polar Care Cube is working efficiently all the time. Many of these parts can be bought from an authorized distributor or directly from the maker’s website. Timely substitution can help you avoid major repairs in the future.
